Intelligent automatic shoe production line from China manufacture will introduce its maintenance to you today.
Adjustment of the front support platform: (upper limit, lower limit, elevation angle, position, rising speed, rising speed of the outer support platform, support angle) The angle matches the bottom of the shoe last and is parallel to the sweeping knife; ②The outer support platform will automatically stop when it touches the shoe last. The outer support platform rises a little slower than the inner support platform. The initial height of the inner support platform is adjusted after the upper support platform rises. It is easier to place the last but break the shoe upper when it is lower; ④ The support platform should start to descend when the sweep knife approaches (about 3mm). Too early lowering of the outer support platform will affect the stability of the upper, and it is easy to sweep the midsole. Too early lowering of the inner support platform will cause too much friction between the sweeping knife and the upper, causing the upper to be pulled in too much, deformed or broken; ⑤Inner support Platform, the elevation angle is parallel to the sweeping knife, and the working height is about 2mm higher than the sweeping knife (that is, the upper plus the midsole). If it is too low, it will sweep to the midsole, and if it is too high, it will easily break the upper.

The intelligent automatic shoe production line from China manufacture tells you: Adjustment of the tensioner of the front upper machine: (pressure, speed, position and height of the tensioner) Fixed on the shoe last, excessive pressure of the tensioner will cause the upper to be sprained and the midsole to protrude; ②The distance between the tensioner and the sweeping edge is usually about 10mm, and both sides should be consistent to avoid eccentricity and cause the last to move.