Intelligent automatic shoe production line on sales, then we need to know the maintenance of the product.
Take the previous helper as an example:
1. Adjustment of claws of the front machine (position, angle, radian, pressure) ① Adjust the claw plate to the middle position, and adjust the position of the claws with a medium-sized last; ② The balance distance of the claws can be tilted forward after the three or four claws are arranged 5mm is enough; ③The center line of the arc of the middle claw is aligned with the center line of the inner support platform. There must be a gap of 7~10mm between the middle claw and the support platform. If the gap is large, it is easy to sweep the midsole; ④Use the left foot last to adjust the left 234 claws Position, use the right last to adjust the position of the right 234 claws, and the claws are arranged according to the pattern of the last; ⑤Do not touch between the claws, but the smaller the gap, the better, and the height of each claw is about 2mm away from the sweeping knife; ⑥The claws The principle of pressure is to grasp the upper without slipping. If it is too large, it will cause damage to the upper and rupture during the ascent.

2. Adjustment of each stroke switch of the front side machine: (claw release time, support platform lowering time, pressure head pressurization time, tensioner retreat time, pressure head tensioner action time, recovery time) ①Sweeping knife according to the last The pattern selection is slightly smaller than that of the last; ②The claws start to loosen and drop when the sweeping knife sweeps about 1~2mm; ③The supporting platform should drop when it is 2mm before the sweeping knife; Or the previous action, the opening of the secondary pressure ahead of time is good for thicker uppers, but it will damage thinner uppers.
Intelligent automatic shoe production line on sales, if necessary, please contact us.