A set of Pneumatic hammer flat machine, if you do not pay attention to the maintenance work, it will be damaged prematurely or fail frequently, which will greatly reduce the service life of the device. measures to reduce and prevent failures and extend the service life of components and systems. Therefore, enterprises should formulate maintenance management specifications for pneumatic devices, strengthen management education, and strictly manage.

The central task of the maintenance work is to ensure the supply of clean and dry compressed air to the pneumatic system, to ensure the air tightness of the pneumatic system, to ensure that the oil mist lubricating components get the necessary lubrication, and to ensure that the Pneumatic hammer flat machine and the system get the specified working conditions (such as using pressure, voltage, etc.) to ensure that the pneumatic actuator works according to the predetermined requirements.

The Pneumatic hammer flat machine lubricator is better to use the specification of replenishing oil once a week. When replenishing oil, pay attention to the reduction of oil quantity. If the oil consumption is too low, the oil dripping amount should be re-adjusted. After the adjustment, the oil dripping amount is still reduced or no oil dripping. Check whether the inlet and outlet of the lubricator are installed backwards, whether the oil passage is blocked, and whether the selected lubricator specifications are not. Suitable.

Monthly and quarterly maintenance work should be more careful than daily and weekly maintenance work, but still limited to what can be checked externally. The main contents are: carefully check the leakage in various places, tighten the loose screws and pipe joints, check the quality of the air discharged from the reversing valve, check the flexibility of each adjustment part, check the correctness of the indicating instrument, and check the switching action of the solenoid valve. reliability, check the quality of the cylinder rod and everything that can be checked from the outside.

The maintenance work of Pneumatic hammer flat machine can be divided into regular maintenance work and regular maintenance work. The former refers to maintenance work that must be carried out on a daily basis, while the latter can be maintenance work carried out on a weekly, monthly or quarterly basis. Maintenance work should be documented. Maintenance work should be recorded to facilitate future fault diagnosis and processing.