Production machines are heavy oil machinery and equipment. When a failure occurs, it takes a long time to repair, so correct maintenance and failure prevention are required. The following are the two daily maintenance items of the vertical disc thermal bonding machine for your reference.

1. Glue injection system

1. Persist in external cleaning of the appearance of the cylinder core, cylinder auxiliary column, material pipeline motor column, valve seat cylinder mandrel, etc., to prevent pollution from accumulating outside and hiding in the gaps of mechanical parts, affecting performance;

2. Regularly check the system nut to ensure its normal operation;

3. Take out some machinable plastics from the thread every three months, because some threads need to be coated with heat-resistant grease (red lead or molybdenum disulfide) at high temperature to avoid being worn to death;

4. Except for plastics, pigments and additives, other items shall not be put into the product to damage the screw and additives;

5. When the vertical disc thermal bonding machine does not reach the preset temperature, do not start the hydraulic motor to drive, spray glue or loosen, otherwise the screw head will be damaged;

2. Locking and template of thermal bonding machine

1. Strictly observe the external cleaning of the mandrel of the mold cylinder, the column of the mold cylinder and the upper and lower columns to prevent the accumulation of dirt, so as not to damage these parts during operation;

2. Control the pressure, speed and position adjustment of the parting stroke to reduce the impact so as not to damage the template and mold;

3. Open the mold every time you close it, so that the gap between the upper and lower molds sticks. If the mold is fully open, the machine will be in working condition, because the upper template and some self-weight are due to the mold. Affect the service life of components such as oil seal valves;

4. The auxiliary mold fixing screw can prevent the use of alloy screws with too high hardness. The depth of locking the vertical disc thermal bonding machine screw into the teeth must be greater than the corresponding depth, and the tightening torque must be appropriate. Before the mold is fixed, be sure to check whether the mold and the fixing surface are clean. Use a wipe if necessary.